Roll over image for larger view

MakerBot PLA Small Spool True Orange

Product code: MKBTF-PLAS-TORANGE

Part Number: MP05787

£18.20

£21.84 incl. VAT.

In stock

: True Orange

QTY

MakerBot PLA Small Spool True Orange filament is an excellent and consistent filament specifically designed for printing with MakerBot 3D printers.

Every MakerBot PLA filament colour has been comprehensively tested at both 100 and 200 micron layer resolutions on a MakerBot Replicator Desktop 3D printer to ensure the best print finish possible and verify that the filament will perform every feature that MakerBot software offers, reliably slicing and printing every time. All MakerBot filaments are manufactured to tight tolerances to ensure uniform diameter from the beginning of a spool to the end.

MakerBot PLA Small Spool True Orange is 1.75mm in diameter, bio-degradable and has a gloss finish. Its qualities make it an excellent all-round material for 3D printing.

Available in a wide range of colours and spool sizes. Check out Features to view spool size compatibility.

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

FEATURES
TECH SPECS
FAQS

	MakerBot Filament Compatibility
MakerBot PLA Filament	Small Spool	Large Spool	XL Spool	XXL Spool	1kg Spool
Replicator 2	✔	✔			✔
Replicator Mini	✔
Replicator Mini+	✔
Replicator (5th Gen)	✔	✔
Replicator+	✔	✔
Replicator Z18	✔	✔	✔	✔
MakerBot ABS Filament
Replicator 2X					✔
MakerBot Tough PLA Filament (with MakerBot Tough PLA Smart Extruder+)
Replicator (5th Gen)		✔
Replicator+		✔
Replicator Z18		✔

Spool size weight guide:

Small spool contains approx. 220g of filament

Large spool contains approx. 900g of filament

1kg spool contains approx. 1kg of filament

XL spool contains approx. 2.26kg of filament

XXL spool contains approx. 4.53kg of filament

MakerBot PLA Technical Specifications

Type	MakerBot PLA (NatureWorks® Polylactide Resin)
Diameters	1.75mm
Recommended print temperature	215°C - 230°C
Spool hub hole	Small Spool: 50.8mm Large Spool: 50.8mm 1kg Spool: 50.8mm XL Spool: 25.4mm XXL Spool: 25.4mm
Spool diameter	Small Spool: 150mm Large Spool: 250mm 1kg Spool: 203mm XL Spool: 216mm XXL Spool: 216mm
Spool width	Small Spool: 40mm Large Spool: 40mm 1kg Spool: 76.2mm XL Spool: 88.9mm XXL Spool: 177.8mm
Glass transition temperature	60°C - 65°C
Compatibility	Compatible with MakerBot 3D printers (see Features) and other 3D printers which accept 1.75mm filament
Storage conditions	For best results, store in air-tight container
Approved food contact safe	No

NB: Properties and settings may vary depending on printer type and setting.

Download MakerBot PLA product data sheet PDF

Does MakerBot PLA work with all 3D printers?

MakerBot PLA filament comes on an open spool (see Tech Specs for spool dimensions) in 1.75mm diameter. Whilst specifically designed for MakerBot range of desktop 3D printers, it can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

Why use MakerBot PLA filament?

MakerBot PLA Filament has been well researched and developed to produce a reliable filament that sticks to the platform without peeling, cracking, or curling. It is specifically developed for use with MakerBot Replicator 2 Desktop 3D Printer and all Fifth Generation MakerBot Replicator 3D Printers.

Can MakerBot PLA be used as support material?

Yes, MakerBot PLA works well in prints with support material and can be removed once the print is complete.

Other Colours Available

MakerBot PLA Small Spool True Black True Black £18.20 excl. VAT MKBTF-PLAS-TBLACK	MakerBot PLA Small Spool True Blue True Blue £18.20 excl. VAT MKBTF-PLAS-TBLUE	MakerBot PLA Small Spool True Green True Green £18.20 excl. VAT MKBTF-PLAS-TGREEN	MakerBot PLA Small Spool True Purple True Purple £18.20 excl. VAT MKBTF-PLAS-TPURPLE	MakerBot PLA Small Spool True Red True Red £18.20 excl. VAT MKBTF-PLAS-TRED
MakerBot PLA Small Spool True White True White £18.20 excl. VAT MKBTF-PLAS-TWHITE	MakerBot PLA Small Spool True Yellow True Yellow £18.20 excl. VAT MKBTF-PLAS-TYELLOW	MakerBot PLA Small Spool Cool Grey Cool Grey £18.20 excl. VAT MKBTF-PLAS-CGREY	MakerBot PLA Small Spool Natural Natural £18.20 excl. VAT MKBTF-PLAS-NATURAL	MakerBot PLA Small Spool Army Green Army Green £18.20 excl. VAT MKBTF-PLAS-AGREEN
MakerBot PLA Small Spool Khaki Khaki £18.20 excl. VAT MKBTF-PLAS-KHAKI	MakerBot PLA Small Spool Light Brown Light Brown £18.20 excl. VAT MKBTF-PLAS-LBROWN	MakerBot PLA Small Spool Peach Peach £18.20 excl. VAT MKBTF-PLAS-PEACH	MakerBot PLA Small Spool Warm Grey Warm Grey £18.20 excl. VAT MKBTF-PLAS-WGREY

FOLLOW

SIGN UP TO NEWSLETTER * required fields

© Copyright 2019 CREAT3D Ltd. All rights reserved. CREAT3D™ and its associated logo are trademarks of CREAT3D Ltd and are the subject of trademark applications or registrations in various countries around the world. All other trademarks are the property of their respective owners.

Company no. 08416238.