Innofil3D PLA Silver 2.85mm

Roll over image for larger view

Spacer imageSpacer image

Innofil3D PLA Silver 2.85mm

Product code: INNOF-PLA285-SILVER

Part Number:  PLA-0021b075

 

£22.50

£27.00 incl. VAT.

 

In stock
:  Silver
 

QTY

 

PLA Silver 2.85mm filament produced by Innofil3D, is a high quality biodegradable 3D printing material. PLA is a great all-round 3D printing filament, particularly suitable for larger parts as it has a lower tendency to warp.

 

InnofIl3D PLA is available in a wide range of colours in 2.85mm diameter.

 

Each Innofil3D PLA spool contains approx. 750g of filament.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


Innofil3D PLA Technical Specifications

 

Type

Innofil3D PLA

(Polylactic Acid)

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

200°C ± 10°C

Recommended bed temperature

Heated bed not required

Recommended print speed

40 - 80mm/sec

Spool hub hole

55mm

Spool diameter

200mm

Density

1240 kg/m3

Compatibility

Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm PLA filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe

Natural grade is FDA approved

Coloured grades are not tested

 

NB: Properties and settings may vary depending on printer type and setting.

 

Download InnofIl3D PLA technical data sheet PDF

Download Innofil3D PLA safety data sheet PDF

Does Innofil3D PLA work with all 3D printers?

Innofil3D PLA filament comes on an open spool (see Tech Specs for spool dimensions). It is suitable for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

What are the processing guidelines for Innofil3D PLA?

  • Recommended extruder temperature: 200°C ± 10°C

  • Recommended platform temperature: heated bed not required

  • Recommended print speed: 40 - 80mm/s 

 

What is the diameter tolerance?

The diameter tolerance on Innfil3D PLA filament is 2.85mm ± 0.10mm and 1.75 ± 0.05 mm.

 

Is a heated bed necessary for printing with Innofil3D PLA?

No, a heated bed is not necessary for printing in Innofil3D PLA filaments. PLA performs well on both heated and non-heated build platforms

 

Can Innofil3D PLA be used as support material?

Yes, PLA works well in prints as support material and can be removed once the print is complete.

 

 

Other Colours Available
Innofil3D PLA Black 2.85mm

Innofil3D PLA Black 2.85mm

Black
£22.50 excl. VAT
INNOF-PLA285-BLACK
Innofil3D PLA Blue 2.85mm

Innofil3D PLA Blue 2.85mm

Blue
£22.50 excl. VAT
INNOF-PLA285-BLUE
Innofil3D PLA Green 2.85mm

Innofil3D PLA Green 2.85mm

Green
£22.50 excl. VAT
INNOF-PLA285-GREEN
Innofil3D PLA Grey 2.85mm

Innofil3D PLA Grey 2.85mm

Grey
£22.50 excl. VAT
INNOF-PLA285-GREY
Innofil3D PLA Natural Translucent 2.85mm

Innofil3D PLA Natural Translucent 2.85mm

Natural Translucent
£22.50 excl. VAT
INNOF-PLA285-NATTRANS
Innofil3D PLA Orange 2.85mm

Innofil3D PLA Orange 2.85mm

Orange
£22.50 excl. VAT
INNOF-PLA285-ORANGE
Innofil3D PLA Red 2.85mm

Innofil3D PLA Red 2.85mm

Red
£22.50 excl. VAT
INNOF-PLA285-RED
Innofil3D PLA White 2.85mm

Innofil3D PLA White 2.85mm

White
£22.50 excl. VAT
INNOF-PLA285-WHITE
Innofil3D PLA Yellow 2.85mm

Innofil3D PLA Yellow 2.85mm

Yellow
£22.50 excl. VAT
INNOF-PLA285-YELLOW
 
CREAT3D specialists in desktop 3D printing