MakerBot ABS 1kg Spool True Green

Roll over image for larger view

Spacer imageSpacer image

MakerBot ABS 1kg Spool True Green




£52.80 incl. VAT.


In stock
:  True Green



MakerBot ABS 1kg True Green filament is an excellent and consistent filament specifically designed for printing with the MakerBot Replicator 2X Experimental Desktop 3D Printer.


All MakerBot filaments are manufactured to tight tolerances to ensure uniform diameter from the beginning of a spool to the end.


MakerBot ABS is 1.75mm in diameter and is available in a wide range of colours on 1kg spools.


Check out Features to view spool size compatibility.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
Email to a friend icon



MakerBot Filament Compatibility

MakerBot PLA Filament

Small Spool

Large Spool

XL Spool

XXL Spool

1kg Spool

Replicator 2

Replicator Mini

Replicator Mini+

Replicator (5th Gen)


Replicator Z18

MakerBot ABS Filament

Replicator 2X

MakerBot Tough PLA Filament (with MakerBot Tough PLA Smart Extruder+)

Replicator (5th Gen)






Replicator Z18




Spool size weight guide:

Small spool contains approx. 220g of filament

Large spool contains approx. 900g of filament

1kg spool contains approx. 1kg of filament

XL spool contains approx. 2.26kg of filament

XXL spool contains approx. 4.53kg of filament

MakerBot ABS Technical Specifications


Type MakerBot ABS
Diameters 1.75mm
Recommended print temperature


Spool hub hole

1kg Spool: 50.8mm

Spool diameter

1kg Spool: 203mm

Spool width

1kg Spool: 76.2mm

Glass transition temperature 105°C

Compatible with MakerBot 3D printers (see Features) and other

3D printers which accept 1.75mm ABS filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe No


NB: Properties and settings may vary depending on printer type and setting.

Download MakerBot ABS product data sheet PDF


Does MakerBot ABS work with all 3D printers?

MakerBot ABS filament comes on an open spool (see Tech Specs for spool dimensions) in 1.75mm diameter. Whilst specifically designed for use with the MakerBot Replicator 2X Experimental Desktop 3D printer, it can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.


Can MakerBot ABS be used as support material?

Yes, MakerBot ABS works well in prints with support material and can be removed once the print is complete.

As an alternative, you can try using MakerBot Dissolvable filament as the support material for prints on your MakerBot Replicator 2X 3D printer uses. The finished part is placed in limonene for 8-24 hours to remove the dissolvable support material, leaving your finished ABS part in tact.



CREAT3D specialists in desktop 3D printing