MakerBot Dissolvable (HIPS) 1kg

Roll over image for larger view

Spacer imageSpacer image

MakerBot Dissolvable (HIPS) 1kg

Product code: MKBTF-DIS1KG-DISSOLVABLE

 

£55.00

£66.00 incl. VAT.

 

In stock
:  Dissolvable (HIPS) 
 

QTY

 

MakerBot Dissolvable filament (HIPS) is an excellent speciality filament specifically designed for printing with the MakerBot Replicator 2X Experimental Desktop 3D Printer. As MakerBot Dissolvable filament dissolves in limonene, it is particularly useful for printing support structures on more intricate or complex designed parts, or those parts where support is difficult to remove by hand.

                                                                                

Place the finished print in limonene for 8-24 hours to dissolve the MakerBot Dissolvable filament, leaving in tact the ABS part.

 

MakerBot Dissolvable is 1.75mm in diameter, of a whitish colour and available in 1kg spools.

 

Check out Features to view spool size compatibility.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


 

MakerBot Filament Compatibility

MakerBot Dissolvable Filament

Small Spool

Large Spool

XL Spool

XXL Spool

1kg Spool

Replicator 2X

MakerBot ABS Filament

Replicator 2X

 

Spool size weight guide:

Small spool contains approx. 220g of filament

Large spool contains approx. 900g of filament

1kg spool contains approx. 1kg of filament

XL spool contains approx. 2.26kg of filament

XXL spool contains approx. 4.99kg of filament

Type

MakerBot Dissolvable Filament

(HIPS - Impact Polystyrene)
Diameters 1.75mm
Recommended print temperature

250°C

Spool hub hole

1kg Spool: 50.8mm

Spool diameter

1kg Spool: 203mm

Spool width

1kg Spool: 76.2mm

Dissolvable Yes in Limonene
Compatibility

Compatible with MakerBot Replicator 2X Experimental 3D printer (see Features) and other

3D printers which accept 1.75mm Dissolvable filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB: Properties and settings may vary depending on printer type and setting.

 

Download MakerBot Dissolvable product data sheet PDF

Does MakerBot Dissolvable work with all 3D printers?

MakerBot Dissolvable filament comes on an open spool (see Tech Specs for spool dimensions) in 1.75mm diameter. Whilst specifically designed for use with the MakerBot Replicator 2X Experimental Desktop 3D printer, it can be used for other commercially available leading brands 3D FDM/FFF printers where printing in dissolvable filament is possible. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

Can MakerBot Dissolvable be used as support material?

Yes, MakerBot Dissolvable is designed to be used as a support material. It is particularly suited for more complex or intricate parts that are printed in ABS, with Dissolvable filament used for support structures.

 

The printed part can be placed in limonene for 8-24 hours to remove the dissolvable support material, leaving your finished ABS part in tact.

 

Other Colours Available
MakerBot ABS 1kg Spool True Blue

MakerBot ABS 1kg Spool True Blue

True Blue
£44.00 excl. VAT
MKBTF-ABS1KG-TBLUE
CREAT3D specialists in desktop 3D printing