Innofil3D InnoSolve 1.75mm

Roll over image for larger view

Spacer imageSpacer image

Innofil3D InnoSolve 1.75mm

Product code: INNOF-175-SOLVE



£58.80 incl. VAT.


In stock



InnoSolve 1.75mm filament produced by Innofil3D, is a soluble PVA (Polyvinyl Alcohol Compound) 3D printing material, making it a great filament for printing support structures on a dual or triple headed 3D printer. InnoSolve is soluble in cold water and biodegradable.


InnoSolve is a natural yellow white in colour.


Each Innofil3D InnoSolve spool contains approx. 500g of filament.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
Email to a friend icon



Innofil3D InnoSolve Water Soluble PVA

(Polyvinyl Alcohol Compound)




Recommended print temperature

220°C ± 10°C

Recommended print speed 40 - 80 mm/s
Spool hub hole


Spool diameter 200mm
Density       1200 - 1300 kg/m3

Compatible with wide range of FFF / FDM based 3D printers which

accept 1.75mm or 2.85mm filament and can use soluble support material

Storage conditions

For best results, store in air-tight container

Approved food contact safe No


NB Properties and settings may vary depending on printer type and settings.


Download Innofil3D InnoSolve technical data sheet PDF

Does Innofil3D InnoSolve work with all 3D printers?

Innofil3D InnoSolve filament comes on an open spool (see Tech Specs for spool dimensions) in 1.75mm and 2.85mm diameter. It is suitable for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.


As it is a soluble filament, it has a great application for printing support structures on your part, which can then be dissolved post print in cold water. As such, for this use, InnoSolve would be best on a multiple extruder 3D printer, to allow a 2nd nozzle to be assigned to print in InnoSolve.


What are the processing guidelines for Innofil3D InnoSolve  filament?

  • Recommended extruder temperature: 220°C ± 10°C

  • Recommended print speed: 40 - 80mm/s 


What is the diameter tolerance?

The diameter tolerance on Innfil3D InnoSolve filament is 2.85mm ± 0.10mm and 1.75 ± 0.05 mm.



CREAT3D specialists in desktop 3D printing