colorFabb XT-CF20 1.75mm

Roll over image for larger view

  
Spacer imageSpacer image

colorFabb XT-CF20 1.75mm

Product code: CLRFBF-175-XTCF20

 

£37.50

£45.00 incl. VAT.

 

In stock
 
 

QTY

 

colorFabb XT-CF20 1.75mm by is a speciality co-polyester based, carbon fibre composite 3D printing material. It consists of Eastman Amphora™ 3D polymer blended with 20% specially sourced carbon fibres, creating a high-stiffness 3D printing filament with a higher temperature resistance post print (80°C).

 

3D printing in colorFabb XT-CF20 creates a great black matt finish to your parts, ideal for engineering applications or prototypes requiring further testing or finishing.

 

Each colorFabb XT-CF20 spool contains approx. 750g of filament and is available in 1.75mm and 2.85mm diameters.

 

Due to the abrasive nature of carbon fibre, the material may accelerate the wear of the nozzle, in particular brass nozzles, much faster than unfilled filaments. Therefore it is recommended to use stainless steel or hardened copper alloy nozzles.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb XT CF20 Technical Specifications

 

Name

colorFabb XT-CF20

colorFabb XT-COPOLYESTER, Eastman Amphora (TM) 3D Polymer AM1800 with 20% carbon fibre

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

240°C - 260°C

Recommended bed temperature 60°C - 70°C (if available. Heated bed not required)
Recommended print speed 40 - 70 mm/s
Spool hub hole

55mm      

Spool diameter 200mm
Glass transition temperature 80°C
Tensile properties Extreme High Flex Modulus (6.2 GPa) 
Compatibility 

Due to the abrasive nature of carbon fibre, the material may accelerate the wear of the nozzle, in particular brass nozzles, much faster than unfilled filaments. Therefore it is recommended to use stainless steel or hardened copper alloy nozzles

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB Properties and settings may vary depending on printer type and settings.

 

Download colorFabb XT CF-20 Product Data Sheet PDF

Download colorFabb XT CF-20 Material Safety Data Sheet PDF

Does colorFabb XT-CF20 work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

Due to the abrasive nature of carbon fibre, the material may accelerate the wear of the nozzle, in particular brass nozzles, much faster than unfilled filaments. Therefore it is recommended to use stainless steel or hardened copper alloy nozzles.

 

What are the processing guidelines for colorFabb XT-CF20 filament?

  • Recommended extruder temperature: 240°C - 260°C

  • Recommended platform temperature: 60°C - 70°C

  • Recommended print speed: 40 - 70 mm/s

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

 

Other Colours Available
colorFabb bronzeFill 1.75mm

colorFabb bronzeFill 1.75mm

£37.50 excl. VAT
CLRFBF-175-BRONZE
colorFabb copperFill 1.75mm

colorFabb copperFill 1.75mm

£37.50 excl. VAT
CLRFBF-175-COPPER
colorFabb_XT Clear 2.85mm

colorFabb_XT Clear 2.85mm

Clear
£27.50 excl. VAT
CLRFBF-XT285-NATURAL
colorFabb_XT Orange 2.85mm

colorFabb_XT Orange 2.85mm

Orange
£29.50 excl. VAT
CLRFBF-XT285-ORANGE
CREAT3D specialists in desktop 3D printing