colorFabb PLA/PHA XL Spool Standard White 1.75mm 2.2kg

Roll over image for larger view

Spacer imageSpacer image

colorFabb PLA/PHA XL Spool Standard White 1.75mm 2.2kg

Product code: CLRFBF-PHA175-XLSTDWHITE

 

£65.00

£78.00 incl. VAT.

 

In stock
:  Standard White
 

QTY

 

PLA / PHA Standard White XL Spool in 1.75mm filament by colorFabb is a PLA based filament enhanced with PHA (Polyhydroxyalkanoate) which makes the filament tougher, with good layer adhesion properties and reduced warping tendencies. It’s an excellent 3D printing filament.

 

PHA is similar to PLA in that it is a bio-polyester, ensuring that colorFabb PLA / PHA filament is still biodegradable.

 

Each colorFabb PLA / PHA XL spool contains approx. 2.2kg of filament.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb PLA/PHA Technical Specifications

 

Type

colorFabb PLA / PHA

(Polylactic Acid with Polyhydroxyalkanoate)

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

195°C - 220°C

Recommended bed temperature

50°C - 60°C

Recommended print speed

40 - 100mm/sec

Spool hub hole

55mm

Spool diameter

200mm

Glass transition temperature

55°C

Compatibility

Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB: Properties and settings may vary depending on printer type and setting.

 

Download colorFabb PLA / PHA product data sheet PDF

Download colorFabb PLA / PHA safety data sheet PDF

 

Does colorFabb PLA/PHA work with all 3D printers?

The colorFabb testlab features a wide range of popular FDM / FFF based 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, BEETHEFIRST.

 

As such, colorFabb PLA / PHA can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

What are the processing guidelines for colorFabb PLA/PHA?

  • Recommended extruder temperature: 195-220°C

  • Recommended platform temperature: 50-60°C (if available, heated bed not required)

  • Recommended print speed: 40 - 100mm/s 

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

Is a heated bed necessary for printing with colorFabb PLA/PHA?

No, a heated bed is not necessary for printing in colorFabb PLA / PHA filaments. PLA / PHA performs well on both heated and non-heated build platforms. For those printing on a cold build platform masking tape works well as the rough surface provides additional adhesion for the first layer.

 

Is it necessary to coat the build platform prior to a print?

We would recommend using your normal adhesion, as you would for any other print, for example a little glue stick on an Ultimaker 2.

 

Can colorFabb PLA/PHA be used as support material?

Yes, colorFabb works well in prints as support material and can be removed once the print is complete.

 

 

CREAT3D specialists in desktop 3D printing