colorFabb PLA/PHA Magenta 2.85mm

Roll over image for larger view

Spacer imageSpacer image

colorFabb PLA/PHA Magenta 2.85mm

Product code: CLRFBF-PHA285-MAGENTA

 

£27.00

£32.40 incl. VAT.

 

In stock
:  Magenta
 

QTY

 

PLA / PHA Magenta 2.85mm filament by colorFabb is a PLA based filament enhanced with PHA (Polyhydroxyalkanoate) which makes the filament tougher, with good layer adhesion properties and reduced warping tendencies. It’s an excellent 3D printing filament.

 

PHA is similar to PLA in that it is a bio-polyester, ensuring that colorFabb PLA / PHA filament is still biodegradable.

 

Each colorFabb PLA / PHA spool contains approx. 750g of filament, is available in 1.75mm and 2.85mm diameters in a range of colours.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb PLA/PHA Technical Specifications

 

Type

colorFabb PLA / PHA

(Polylactic Acid with Polyhydroxyalkanoate)

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

195°C - 220°C

Recommended bed temperature

50°C - 60°C

Recommended print speed

40 - 100mm/sec

Spool hub hole

55mm

Spool diameter

200mm

Glass transition temperature

55°C

Compatibility

Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB: Properties and settings may vary depending on printer type and setting.

 

Download colorFabb PLA / PHA product data sheet PDF

Download colorFabb PLA / PHA safety data sheet PDF

 

Does colorFabb PLA/PHA work with all 3D printers?

The colorFabb testlab features a wide range of popular FDM / FFF based 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, BEETHEFIRST.

 

As such, colorFabb PLA / PHA can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

What are the processing guidelines for colorFabb PLA/PHA?

  • Recommended extruder temperature: 195-220°C

  • Recommended platform temperature: 50-60°C (if available, heated bed not required)

  • Recommended print speed: 40 - 100mm/s 

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

Is a heated bed necessary for printing with colorFabb PLA/PHA?

No, a heated bed is not necessary for printing in colorFabb PLA / PHA filaments. PLA / PHA performs well on both heated and non-heated build platforms. For those printing on a cold build platform masking tape works well as the rough surface provides additional adhesion for the first layer.

 

Is it necessary to coat the build platform prior to a print?

We would recommend using your normal adhesion, as you would for any other print, for example a little glue stick on an Ultimaker 2.

 

Can colorFabb PLA/PHA be used as support material?

Yes, colorFabb works well in prints as support material and can be removed once the print is complete.

 

 

Other Colours Available
colorFabb PLA/PHA Blue Grey 2.85mm

colorFabb PLA/PHA Blue Grey 2.85mm

Blue Grey
£27.00 excl. VAT
CLRFBF-PHA285-BGREY
colorFabb PLA/PHA Dutch Orange 2.85mm

colorFabb PLA/PHA Dutch Orange 2.85mm

Dutch Orange
£27.00 excl. VAT
CLRFBF-PHA285-DORANGE
colorFabb PLA/PHA Intense Green 2.85mm

colorFabb PLA/PHA Intense Green 2.85mm

Intense Green
£27.00 excl. VAT
CLRFBF-PHA285-IGREEN
colorFabb PLA/PHA Leaf Green 2.85mm

colorFabb PLA/PHA Leaf Green 2.85mm

Leaf Green
£27.00 excl. VAT
CLRFBF-PHA285-LGREEN
colorFabb PLA/PHA Light Brown 2.85mm

colorFabb PLA/PHA Light Brown 2.85mm

Light Brown
£27.00 excl. VAT
CLRFBF-PHA285-LBROWN
colorFabb PLA/PHA Lila 2.85mm

colorFabb PLA/PHA Lila 2.85mm

Lila
£27.00 excl. VAT
CLRFBF-PHA285-LILA
colorFabb PLA/PHA Olympic Gold 2.85mm

colorFabb PLA/PHA Olympic Gold 2.85mm

Olympic Gold
£27.00 excl. VAT
CLRFBF-PHA285-OGOLD
colorFabb PLA/PHA Shining Silver 2.85mm

colorFabb PLA/PHA Shining Silver 2.85mm

Shining Silver
£27.00 excl. VAT
CLRFBF-PHA285-SSILVER
colorFabb PLA/PHA Signal Yellow 2.85mm

colorFabb PLA/PHA Signal Yellow 2.85mm

Signal Yellow
£27.00 excl. VAT
CLRFBF-PHA285-SIGYELLO
colorFabb PLA/PHA Sky Blue 2.85mm

colorFabb PLA/PHA Sky Blue 2.85mm

Sky Blue
£27.00 excl. VAT
CLRFBF-PHA285-SBLUE
colorFabb PLA/PHA Standard Black 2.85mm

colorFabb PLA/PHA Standard Black 2.85mm

Standard Black
£27.00 excl. VAT
CLRFBF-PHA285-STDBLACK
colorFabb PLA/PHA Standard White 2.85mm

colorFabb PLA/PHA Standard White 2.85mm

Standard White
£27.00 excl. VAT
CLRFBF-PHA285-STDWHITE
colorFabb PLA/PHA Traffic Red 2.85mm

colorFabb PLA/PHA Traffic Red 2.85mm

Traffic Red
£27.00 excl. VAT
CLRFBF-PHA285-TRFRED
colorFabb PLA/PHA Ultramarine Blue 2.85mm

colorFabb PLA/PHA Ultramarine Blue 2.85mm

Ultramarine Blue
£27.00 excl. VAT
CLRFBF-PHA285-UMBLUE
colorFabb PLA/PHA Green Transparent 2.85mm

colorFabb PLA/PHA Green Transparent 2.85mm

Green Transparent
£27.00 excl. VAT
CLRFBF-PHA285-GREENTRANS
colorFabb PLA/PHA Orange Translucent 2.85mm

colorFabb PLA/PHA Orange Translucent 2.85mm

Orange Translucent
£27.00 excl. VAT
CLRFBF-PHA285-ORANGETRANS
colorFabb PLA/PHA Red Transparent 2.85mm

colorFabb PLA/PHA Red Transparent 2.85mm

Red Transparent
£27.00 excl. VAT
CLRFBF-PHA285-REDTRANS
colorFabb PLA/PHA Blueish White 2.85mm

colorFabb PLA/PHA Blueish White 2.85mm

Blueish White
£27.00 excl. VAT
CLRFBF-PHA285-BWHITE
colorFabb PLA/PHA Chocolate Brown 2.85mm

colorFabb PLA/PHA Chocolate Brown 2.85mm

Chocolate Brown
£27.00 excl. VAT
CLRFBF-PHA285-CBROWN
colorFabb PLA/PHA Fluorescent Green 2.85mm

colorFabb PLA/PHA Fluorescent Green 2.85mm

Fluorescent Green
£27.00 excl. VAT
CLRFBF-PHA285-FGREEN
colorFabb PLA/PHA Fluorescent Pink 2.85mm

colorFabb PLA/PHA Fluorescent Pink 2.85mm

Fluorescent Pink
£27.00 excl. VAT
CLRFBF-PHA285-FPINK
colorFabb PLA/PHA Greenish Beige 2.85mm

colorFabb PLA/PHA Greenish Beige 2.85mm

Greenish Beige
£27.00 excl. VAT
CLRFBF-PHA285-GBEIGE
colorFabb PLA/PHA Mint Turquoise 2.85mm

colorFabb PLA/PHA Mint Turquoise 2.85mm

Mint Turquoise
£27.00 excl. VAT
CLRFBF-PHA285-MTURQ
colorFabb PLA/PHA Natural 2.85mm

colorFabb PLA/PHA Natural 2.85mm

Natural
£27.00 excl. VAT
CLRFBF-PHA285-NATURAL
colorFabb PLA/PHA Olive Green 2.85mm

colorFabb PLA/PHA Olive Green 2.85mm

Olive Green
£27.00 excl. VAT
CLRFBF-PHA285-OGREEN
colorFabb PLA/PHA Pale Gold 2.85mm

colorFabb PLA/PHA Pale Gold 2.85mm

Pale Gold
£27.00 excl. VAT
CLRFBF-PHA285-PGOLD
colorFabb PLA/PHA Violet Transparent 2.85mm

colorFabb PLA/PHA Violet Transparent 2.85mm

Violet Transparent
£27.00 excl. VAT
CLRFBF-PHA285-VIOTRANS
colorFabb PLA/PHA Warm Red 2.85mm

colorFabb PLA/PHA Warm Red 2.85mm

Warm Red
£27.00 excl. VAT
CLRFBF-PHA285-WRED
colorFabb PLA/PHA Yellow Transparent 2.85mm

colorFabb PLA/PHA Yellow Transparent 2.85mm

Yellow Transparent
£27.00 excl. VAT
CLRFBF-PHA285-YELLTRANS
 
CREAT3D specialists in desktop 3D printing