colorFabb PA-CF Low Warp 2.85mm

Roll over image for larger view

 colorFabb PA-CF Low Warp 2.85mmcolorFabb PA-CF Low Warp 2.85mm 
Spacer imageSpacer image

colorFabb PA-CF Low Warp 2.85mm

Product code: CLRFBF-285-PACF

Part Number:  8719033556232

 

£60.00

£72.00 incl. VAT.

 

In stock
 

QTY

 

colorFabb PA-CF Low Warp 2.85mm 3D printing material has been developed between colorFabb and LEHVOSS Group. PA-CF Low Warp is a carbon-fibre infused polyamide material for use with FFF (extrusion) 3D printers.

 

PA-CF Low Warp demonstrates good tensile and impact strength over standard FFF filaments, and allows continued use at 120°C while retaining sufficient properties for the intended application.

 

PA-CF Low Warp 2.85mm is abrasive. colorFabb recommend using wear resistant nozzles such as hardened steel.

 

Each colorFabb PA-CF spool contains approx. 700g of filament, is available in 2.85mm and 1.75mm diameters.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb PA-CF Low Warp Technical Specifications

 

Name

colorFabb PA-CF Low Warp

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

260°C - 280°C

Recommended bed temperature Cold or 40°C - 50°C (for higher infill prints)
Spool hub hole

55mm      

Spool diameter 200mm
Density 1.4 g/cm3
Comments / considerations

Carbon Fibre is abrasive and will accelerate the nozzle wear of brass nozzles much faster than unfilled filaments. colorFabb recommend using wear resistant nozzles, such as E3D hardened steel nozzles


Due to high stiffness of 2.85mm filament, colorFabb recommend users to use spoolmounts which have some friction between the spool and holder, to prevent unspooling of filament. For more printing tips with colorFabb PA-CF visit https://pa.colorfabb.com/

Storage conditions

Store in air-tight container, material is moisture sensitive

 

NB Properties and settings may vary depending on printer type and settings.

 

Other Colours Available
colorFabb bambooFill 2.85mm

colorFabb bambooFill 2.85mm

£30.00 excl. VAT
CLRFBF-285-BAMBOO
colorFabb bronzeFill 2.85mm

colorFabb bronzeFill 2.85mm

£37.50 excl. VAT
CLRFBF-285-BRONZE
colorFabb woodFill Fine 2.85mm

colorFabb woodFill Fine 2.85mm

£30.00 excl. VAT
CLRFBF-285-WOODFINE
colorFabb XT-CF20 2.85mm

colorFabb XT-CF20 2.85mm

£37.50 excl. VAT
CLRFBF-285-XTCF20
colorFabb_XT Light Blue 2.85mm

colorFabb_XT Light Blue 2.85mm

Light Blue
£29.50 excl. VAT
CLRFBF-XT285-LTBLUE