colorFabb nGen_FLEX Black 1.75mm

Roll over image for larger view

  
Spacer imageSpacer image

colorFabb nGen_FLEX Black 1.75mm

Product code: CLRFBF-NGENFLEX175-BLK

 

£29.50

£35.40 incl. VAT.

 

In stock
:  Black
 

QTY

 

colorFabb nGen_FLEX Black 1.75mm filament is a semi-flexible 3D printing material. nGen_FLEX is a co-polyester developed by colorFabb and Eastman Chemical Company. 

 

colorFabb nGen_FLEX is a functional flexible filament, with good layer adhesion to create watertight parts which are temperature resistant to 125°C, making it well suited to functional models, parts and prototypes. As a co-polymer, nGen_FLEX is engineered to print at regular speeds and can be printed with multiple parameters; more infill generates firmer and tougher prints, whereas small objects or those printed with little infill will feel quite flexible.

 

colorFabb nGen_FLEX is rated a shore hardness of 95A, and can be steam sterilised at 121°C.

 

Each colorFabb nGen_FLEX spool contains approx. 650g of filament and is available in 1.75mm and 2.85mm diameters in Black or Dark Grey.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb nGen Flex Technical Specifications

 

Type

colorFabb nGen_FLEX

Semi-flexible 3D printing material

Eastman Amphora 3D co-polymer

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

240°C - 260°C

Recommended bed temperature

80°C - 100°C

Printing onto an adhesive on the print bed such as BuildTak is advised

Recommended print speed

30 - 60mm/sec

Spool hub hole

55mm

Spool diameter

200mm

Glass transition temperature

125°C

Parts can be steam sterilised to 121°C

Shore hardness rating

95A

Compatibility

Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm filament

Storage conditions

For best results, store in air-tight container

 

NB: Properties and settings may vary depending on printer type and setting.

 

Download colorFabb nGEN_FLEX technical data sheet PDF

Download colorFabb nGen_FLEX material safety data sheet PDF

Download colorFabb nGen_FLEX product regulatory information sheet PDF

Does colorFabb nGen_FLEX work with all 3D printers?

The colorFabb testlab features a wide range of popular 3d printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, Beethefirst.

 

As such, colorFabb nGen_FLEX can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

What qualities does colorFabb nGen_FLEX have?

colorFabb nGen_FLEX is a co-polymer semi-flexible 3D printing material. It is rated as a shore hardness of 95A, and is temperature resistant up to 125°C. The printed parts can also be steam sterilised up to 121°C.

 

What are the processing guidelines for colorFabb nGen_FLEX?

  • Recommended extruder temperature: 240-260°C

  • Recommended platform temperature: 80-100°C

  • Recommended print speed: 30 - 60mm/s 

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

Is a heated bed necessary for printing with colorFabb nGen_FLEX?

nGen_FLEX works best with a heated bed, with temperatures around 80-100°C. colorFabb also recommend printing onto an adhesive on the print bed, such as buildTak for increased adhesion.

 

Are there any additional printing tips for colorFabb nGen_FLEX?

Yes, colorFabb advise printing with 0% for tough strong parts with excellent layer adhesion. However, to improve overhanging surfaces, smaller details and top surfaces, some cooling may be required. It is recommended to begin with 50% cooling and adjust as required. 

 

 

Other Colours Available
colorFabb nGen_FLEX Dark Grey 1.75mm

colorFabb nGen_FLEX Dark Grey 1.75mm

Dark Grey
£29.50 excl. VAT
CLRFBF-NGENFLEX175-DKGREY
CREAT3D specialists in desktop 3D printing