colorFabb nGen Light Green 1.75mm

Roll over image for larger view

Spacer imageSpacer image

colorFabb nGen Light Green 1.75mm

Product code: CLRFBF-NGEN175-LTGREEN

 

£27.50

£33.00 incl. VAT.

 

In stock
:  Light Green 
 

QTY

 

colorFabb nGen Light Green 1.75mm filament is made with Eastman Amphora™ AM3300 3D polymer. It is a low-odour, styrene-free high quality 3D printing material. The chemical make-up of AM3300 also makes the material less sensitive to moisture.

 

colorFabb nGen has good flow properties, a low processing temperature, good bridging capabilities and a high glass transition temperature of 85°C making it an ideal material for engineering applications in form, fit and function testing of parts and prototypes.

 

Each colorFabb nGen spool contains approx. 750g of filament and is available in 1.75mm and 2.85mm diameters in a range of colours.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb nGen Technical Specifications

 

Type

colorFabb nGen

Eastman Amphora 3D Polymer AM3300

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

220°C - 240°C

Recommended bed temperature

65°C - 85°C

Recommended print speed

40 - 60mm/sec

Spool hub hole

55mm

Spool diameter

200mm

Glass transition temperature

85°C

Tensile properties

Tensile Stress @ Yield D 638: 50 MPa (7210 psi)

Tensile Stress @ Break D 638: 35 MPa (6240 psi)

Elongation @ Yield D 638: 4.5%

Elongation @ Break D 638: 193%

Compatibility

Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB: Properties and settings may vary depending on printer type and setting.

 

Download colorFabb nGen technical data sheet.pdf

Download colorFabb nGen material safety data sheet.pdf

Download colorFabb nGen conformity.pdf

 

Does colorFabb nGen work with all 3D printers?

The colorFabb testlab features a wide range of popular 3d printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, Beethefirst.

 

As such, colorFabb nGen can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

What qualities does colorFabb nGen have?

colorFabb nGen (Eastman Amphora AM3300 3D Polymer) is a low-odour, styrene-free material specifically developed for 3D printing. nGen has good flow properties, a low processing temperature, good bridging capabilities and a high glass transition temperature of 85°C making it an ideal material for engineering applications in form, fit and function testing of parts and prototypes.

 

What are the processing guidelines for colorFabb nGen?

  • Recommended extruder temperature: 220-250°C

  • Recommended platform temperature: 65-85°C

  • Recommended print speed: 40 - 60mm/s 

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

Is a heated bed necessary for printing with colorFabb nGen?

nGen works best with a heated bed, with temperatures around 65-85°C. 

 

Is it necessary to coat the build platform prior to a print?

We would recommend using your normal adhesion, as you would for any other print, for example a little glue stick on an Ultimaker 2.

 

Are there any additional printing tips for colorFabb nGen?

Yes, colorFabb advise you may need to experiment / adjust your fan cooling when using nGen material. Some 3D printers have aggressive cooling, which can affect layer adhesion. You might find it best to reduce your fan cooling speed, or perhaps only using fan cooling for perimeter lines. 

 

nGen has good bridging capabilities, but will perform best with reduced print bridge speeds. 

 

 

Other Colours Available
colorFabb nGen Black 1.75mm

colorFabb nGen Black 1.75mm

Black
£27.50 excl. VAT
CLRFBF-NGEN175-BLK
colorFabb nGen Clear 1.75mm

colorFabb nGen Clear 1.75mm

Clear
£27.50 excl. VAT
CLRFBF-NGEN175-CLEAR
colorFabb nGen Dark Blue 1.75mm

colorFabb nGen Dark Blue 1.75mm

Dark Blue
£27.50 excl. VAT
CLRFBF-NGEN175-DKBLUE
colorFabb nGen Dark Green 1.75mm

colorFabb nGen Dark Green 1.75mm

Dark Green
£27.50 excl. VAT
CLRFBF-NGEN175-DKGRN
colorFabb nGen Dark Grey 1.75mm

colorFabb nGen Dark Grey 1.75mm

Dark Grey
£27.50 excl. VAT
CLRFBF-NGEN175-DKGREY
colorFabb nGen Gold Metallic 1.75mm

colorFabb nGen Gold Metallic 1.75mm

Gold Metallic
£27.50 excl. VAT
CLRFBF-NGEN175-GOLDMET
colorFabb nGen Grey Metallic 1.75mm

colorFabb nGen Grey Metallic 1.75mm

Grey Metallic
£27.50 excl. VAT
CLRFBF-NGEN175-GRYMET
colorFabb nGen Light Blue 1.75mm

colorFabb nGen Light Blue 1.75mm

Light Blue
£27.50 excl. VAT
CLRFBF-NGEN175-LTBLUE
colorFabb nGen Light Grey 1.75mm

colorFabb nGen Light Grey 1.75mm

Light Grey
£27.50 excl. VAT
CLRFBF-NGEN175-LTGREY
colorFabb nGen Orange 1.75mm

colorFabb nGen Orange 1.75mm

Orange
£27.50 excl. VAT
CLRFBF-NGEN175-ORANGE
colorFabb nGen Pink 1.75mm

colorFabb nGen Pink 1.75mm

Pink
£27.50 excl. VAT
CLRFBF-NGEN175-PINK
colorFabb nGen Purple 1.75mm

colorFabb nGen Purple 1.75mm

Purple
£27.50 excl. VAT
CLRFBF-NGEN175-PURPLE
colorFabb nGen Red 1.75mm

colorFabb nGen Red 1.75mm

Red
£27.50 excl. VAT
CLRFBF-NGEN175-RED
colorFabb nGen Silver Metallic 1.75mm

colorFabb nGen Silver Metallic 1.75mm

Silver Metallic
£27.50 excl. VAT
CLRFBF-NGEN175-SILMET
colorFabb nGen White 1.75mm

colorFabb nGen White 1.75mm

White
£27.50 excl. VAT
CLRFBF-NGEN175-WHITE
colorFabb nGen Yellow 1.75mm

colorFabb nGen Yellow 1.75mm

Yellow
£27.50 excl. VAT
CLRFBF-NGEN175-YELLOW
    
CREAT3D specialists in desktop 3D printing