colorFabb corkFill 2.85mm

Roll over image for larger view

  
Spacer imageSpacer image

colorFabb corkFill 2.85mm

Product code: CLRFBF-285-CORKFILL

 

£30.00

£36.00 incl. VAT.

 

In stock
 
 

QTY

 

corkFill 2.85mm filament by colorFabb is a high quality speciality 3D printing material. It is colorFabb PLA/PHA blended with cork fibres, creating a textured finish to your 3D printed parts. corkFill is dark brown in colour.

 

Each colorFabb corkFill spool contains approx. 650g of filament and is available in 2.85mm and 1.75mm diameters.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb corkFill Technical Specifications

 

Name

colorFabb corkFill

PLA/PHA with cork fibres

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

210°C - 230°C

Recommended bed temperature 50°C - 60°C (if available. Heated bed not required)
Recommended print speed 40 - 60 mm/s
Spool hub hole

55mm      

Spool diameter 200mm
Compatibility 

Compatible with wide range of FFF / FDM based 3D printers which

accept 1.75mm or 2.85mm filament 

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB Properties and settings may vary depending on printer type and settings.

Does colorFabb corkFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, BEETHEFIRST. As such, colorFabb corkFill can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

 

corkFill is likely to require some adjustment to your 3D printer settings to achieve the best results. For example, it is recommended to increase the flow rate with approximately 4-10%. This will allow the filament to keep passing through the hot zone at a steady pace.

 

What are the processing guidelines for colorFabb corkFill filament?

  • Recommended extruder temperature: 210 - 230°C

  • Recommended platform temperature: 50 - 60°C (if available, heated bed not required)

  • Recommended print speed: 40 - 60 mm/s

 

Is a heated bed necessary for printing with colorFabb corkFill?

No, a heated bed is not necessary for printing in corkFill. Should you wish to use a heated bed, the recommended platform temperature is 50-60°C. 

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

 

Other Colours Available
colorFabb bronzeFill 2.85mm

colorFabb bronzeFill 2.85mm

£37.50 excl. VAT
CLRFBF-285-BRONZE
colorFabb copperFill 2.85mm

colorFabb copperFill 2.85mm

£37.50 excl. VAT
CLRFBF-285-COPPER
colorFabb woodFill Fine 2.85mm

colorFabb woodFill Fine 2.85mm

£30.00 excl. VAT
CLRFBF-285-WOODFINE
colorFabb XT-CF20 2.85mm

colorFabb XT-CF20 2.85mm

£37.50 excl. VAT
CLRFBF-285-XTCF20
CREAT3D specialists in desktop 3D printing