colorFabb copperFill 1.75mm

Roll over image for larger view

Spacer imageSpacer image

colorFabb copperFill 1.75mm

Product code: CLRFBF-175-COPPER

 

£37.50

£45.00 incl. VAT.

 

In stock
 
 

QTY

 

copperFill 1.75mm filament by colorFabb is an experimental* speciality 3D printing material.  Based on colorFabb’s excellent PLA filament, copperFill has the addition of micronised copper powder blended within the material. 3D printing in copperFill creates a wonderful finish to your parts, which can then be sanded and polished to shimmer and shine.

 

*Experimental material: testing showed reliable results using the "all metal" hot-ends. Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.

 

Each colorFabb copperFill spool contains approx. 750g of filament, is available in 1.75mm and 2.85mm diameters.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Like this on Facebook icon
 
Email to a friend icon

 


colorFabb copperFill Technical Specifications

 

Name

colorFabb copperFill

(PLA/PHA + fine copper particles)

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

190°C - 210°C

Recommended bed temperature 50°C - 60°C (if available. Heated bed not required)
Recommended print speed 40 - 100 mm/s
Spool hub hole

55mm      

Spool diameter 200mm
Glass transition temperature 55°C
Density 3.9 g/cm3
Compatibility 

Experimental material.

Testing showed reliable results using the "all metal" hot-ends.

Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs. 

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

 

NB Properties and settings may vary depending on printer type and settings.

 

Download colorFabb copperFill Product Data Sheet PDF

Download colorFabb copperFill Material Safety Data Sheet PDF

Does colorFabb copperFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

copperFill is an experimental material. Testing showed reliable results using the "all metal" hot-ends. Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.

 

What are the processing guidelines for colorFabb copperFill filament?

  • Recommended extruder temperature: 190 - 210C°C

  • Recommended platform temperature: 50 - 60°C (if available, heated bed not required)

  • Recommended print speed: 40 - 100 mm/s

 

Are there any tips for printing in colorFabb copperFill?

Yes! Have a read of colorFabb’s blog on printing in copperFill

 

Is a heated bed necessary for printing with colorFabb copperFill?

No, a heated bed is not necessary for printing in bronzeFill. Should you wish to use a heated bed, the recommended platform temperature is 50 - 60°C. 

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0,05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

 

Other Colours Available
colorFabb bronzeFill 1.75mm

colorFabb bronzeFill 1.75mm

£37.50 excl. VAT
CLRFBF-175-BRONZE
colorFabb woodFill Fine 1.75mm

colorFabb woodFill Fine 1.75mm

£30.00 excl. VAT
CLRFBF-175-WOODFINE
colorFabb XT-CF20 1.75mm

colorFabb XT-CF20 1.75mm

£37.50 excl. VAT
CLRFBF-175-XTCF20
colorFabb_XT Clear 1.75mm

colorFabb_XT Clear 1.75mm

Clear
£27.50 excl. VAT
CLRFBF-XT175-NATURAL
CREAT3D specialists in desktop 3D printing