Ultimaker 2 Upgrade Kit

Roll over image for larger view

Spacer imageSpacer image

Ultimaker 2 Upgrade Kit

Product code: ULTIMA-EXTUPGRADE

Part Number:  9510

 

£360.00

£432.00 incl. VAT.

 

On backorder

Additional Options

Ultimaker Kit Onsite Installation:  
Ultimaker Kit Return to Base Installation Service:  
 
 

QTY

 

Upgrade your existing Ultimaker 2 or Ultimaker 2 Extended with the extrusion upgrade kit to enjoy Ultimaker 2+ features including a geared feeder, swappable nozzle and new fans caps. 

 

The kit includes all parts and assembly tools. See "What's Included" tab below for full details.

 

Assembly of the new extrusion upgrade kit takes approximately 1 hour. Download and follow the extrusion upgrade kit installation guide PDF.

 

Only compatible with the Ultimaker 2 and Ultimaker 2 Extended.

Like this on Facebook icon
 
Email to a friend icon

 


What's included in the Ultimaker 2 extrusion upgrade kit:

 

Fully assembled print head

The print head comes fully assembled with all parts and wires in place. The new fancaps ensure the airflow is aimed below the nozzle and equally from both sides and the new Sunon fans are quieter. The heater cartridge is now 35W which improves heat up times and print speeds. The PTFE isolator is made from TFM, which has a longer life span. The spring has been removed and a spacer implemented which puts less pressure on the PTFE isolator. The head uses a new sensitive PT-100 temperature sensor providing accurate readings to allow users to tweak the settings with precision.

 

Swappable nozzles

The standard nozzle size is 0.4mm. The swappable nozzle allows you to use a 0.25mm nozzle for detailed prints or a 0.6mm or 0.8mm for faster prints.

 

Geared feeder motor

A new geared feeder motor that connects to the geared feeder.

 

Geared feeder

The new feeder allows users to easily swap filament and choose the correct pressure for the filament, such as a lower pressure for softer filament. It also features a lever which when raised, lets you manually insert or remove filament.

 

Print head shafts

New print head shafts are included.

 

Ultimaker calibration card

A calibration card is included to level the build plate to the correct height.

 

Filament reel holder

To save desktop space, a shorter filament reel holder is included.

 

Axis tools

The axis tools are required to correctly remove and insert the print head shafts. The axis alignment tools are to align the print head shafts.

 

Build plate clamps

New build plate clamps are included that are much easier to open and close by hand allowing the user to more easily remove the glass plate for cleaning or to access to a print.

 

 ‘+’ stickers

The final touch in transforming your Ultimaker 2 to an Ultimaker 2+.

 

Other Customers Bought
Ultimaker Bowden Tube

Ultimaker Bowden Tube

Replacement Bowden tube for Ultimaker range of 3D printers

£18.00 excl. VAT
ULTIMA-BOWDEN
colorFabb PLA/PHA Shining Silver 2.85mm

colorFabb PLA/PHA Shining Silver 2.85mm

Shining Silver
£27.00 excl. VAT
CLRFBF-PHA285-SSILVER
colorFabb nGen Black 2.85mm

colorFabb nGen Black 2.85mm

Black
£27.50 excl. VAT
CLRFBF-NGEN285-BLK
colorFabb_XT Clear 2.85mm

colorFabb_XT Clear 2.85mm

Clear
£27.50 excl. VAT
CLRFBF-XT285-NATURAL
CREAT3D specialists in desktop 3D printing